Skip to main content

Cleanroom

A cleanroom is indispensable for modern manufacturing processes in semiconductor technology. Our medium-class cleanroom is used for various activities involving the microstructuring of samples and devices, employing a range of processes and equipment.

Three lithography methods are available (both mask-based and maskless), enabling the transfer of a desired microstructure onto a photosensitive resist. Prior to this, the resist is applied uniformly to the surface using a spin coater. Subsequently, selected areas of the substrate can be removed, for example by wet chemical etching. Surface cleaning can be performed using an oxygen plasma. For the deposition of thin films, we employ physical vapor deposition (PVD), where the material can be deposited either thermally or by electron-beam evaporation.

To characterize the fabricated structures, we use a variety of measurement instruments in addition to an optical microscope for visualizing surfaces and fine features. A profilometer is used to precisely measure the height, depth, or roughness of layers and structures. Furthermore, scanning electron microscopes (SEM) and atomic force microscopes (AFM) are available within the research groups.

Fume hoods and safety cabinets provide the necessary protection for the safe handling of various chemicals.

Spincoater

Spincoater

Uwe Lischka

Contact

Manager Cleanroom

Uwe Lischka
E-Mail
+49 (0) 69 / 798 - 47210